Skip To Content

New Factory Sealed Cisco HPE Aruba Huawei and Fortinet Hardware Shipped Worldwide

SFP-GE-LX-SM1310 Huawei Optical Transceivers

Huawei · Huawei Optical Transceivers

SFP-GE-LX-SM1310

Huawei SFP-GE-LX-SM1310 is Optical Transceiver. It’s a Single-mode Module.

New Factory Sealed12 Months Warranty Serial List Before ShipmentWorldwide Delivery
Part Number
SFP-GE-LX-SM1310
Brand
Huawei
Lead Time
Confirmed in writing at quotation

Product Overview

SFP-GE-LX-SM1310 Overview

Huawei SFP-GE-LX-SM1310 is Optical Transceiver. It’s a Single-mode Module.

Key Benefits

What Owning It Changes

  • Optics coded for the platform so the port comes up without an unsupported transceiver warning
  • Reach and wavelength confirmed in writing against the actual fibre plant
  • Optics shipped with the switch order rather than as a separate late consignment
  • Consistent batches so link budgets behave the same across the estate

Problems It Solves

Pain Points It Removes

  • Optics rejected by the switch because the coding does not match the platform
  • Reach wavelength and connector type confused late in the project
  • Small line items that hold up an otherwise complete shipment
  • Mixed batches with inconsistent optical budget across the same link type

Who It Is For

Who Benefits Most from SFP-GE-LX-SM1310

Data Centre Teams

Lighting up new uplinks between racks rows and buildings

Service Providers

Standardising optics across an access and aggregation estate

System Integrators

Completing a switch order with the optics the design assumes

Campus Network Teams

Extending fibre runs between buildings on an existing switch platform

Specifications

Supply Specification

Part NumberSFP-GE-LX-SM1310
BrandHuawei
CategoryHuawei Optical Transceivers
Product ConditionNew factory sealed
CodingCoded for the target platform confirmed before shipment
Reach and WavelengthConfirmed against the fibre plant in writing
Warranty12 months replacement
PackagingOriginal vendor carton with anti static protection
Country of OriginAs printed on the vendor label

Full electrical port and throughput specifications are issued with the quotation against the current vendor datasheet revision

Application Scenarios

Where It Is Deployed

Manufacturing And Quality Control

How This Unit Reaches You

  1. 01

    Platform Check

    Switch or router platform and software train confirmed so coding is correct

  2. 02

    Link Check

    Fibre type reach and connector confirmed against the actual plant

  3. 03

    Sourcing

    Allocated from stock or ordered with a written lead time

  4. 04

    Inbound Check

    Seal photographed serial recorded and validated against the vendor database

  5. 05

    Export Packing

    Anti static tubes inside an export grade outer

  6. 06

    Documentation

    Serial list invoice packing list and certificate pack issued with tracking

ISO 9001

Quality management system covering sourcing inspection and despatch

ISO 14001

Environmental management across packaging and waste handling

CE

Conformity marking as applicable to the equipment supplied

FCC

Compliance marking as applicable to the equipment supplied

RoHS

Restriction of hazardous substances as declared by the manufacturer

Export Compliance

Screening against destination and end use restrictions before despatch

Comparison

Compared with Other Models in This Category

SFP-GE-LX-SM1310OSX010000SFP-25G-SReSFP-GE-SX-MM850
Huawei Optical TransceiversHuawei Optical TransceiversHuawei Optical TransceiversHuawei Optical Transceivers
New factory sealedNew factory sealedNew factory sealedNew factory sealed
12 months replacement12 months replacement12 months replacement12 months replacement
Serial list before shipmentSerial list before shipmentSerial list before shipmentSerial list before shipment

Detailed port power and throughput comparison is supplied with the quotation because the right choice depends on the uplink and power budget at your site

Use Guide

Deployment Guide for SFP-GE-LX-SM1310

  1. 1

    Confirm the Part Number

    Check the full part number including any suffix that sets the software tier or power option. A single trailing letter frequently changes what the unit can do.

  2. 2

    Check Site Prerequisites

    Confirm rack space power cabling and any uplink or accessory dependency before the order is placed rather than at install.

  3. 3

    Unpack and Record

    Photograph the seal before opening and record the serial against your asset register. Keep the carton until commissioning is complete.

  4. 4

    Stage Before Deployment

    Apply the base configuration and target software version on the bench so the change window is used for installation rather than setup.

  5. 5

    Register Entitlement

    If a support contract was purchased register it under the end user name so cases and downloads flow to the operating party.

  6. 6

    Hold a Matched Spare

    For any position where downtime carries real cost keep a spare against the same part number rather than a similar model.

Customisation

Options We Can Configure Before Despatch

Base Configuration Staging

Hostname management address and base config applied so the unit joins on rack

Software Version Alignment

Target software train applied so every unit in a wave matches

Per Site Kit Packing

Packed per site with accessories rather than per part number

Neutral Documentation

Packing lists and labels prepared in your name for direct delivery

Related Products

Other Models in Huawei Optical Transceivers

SFP-25G-SR Huawei Optical Transceivers

Huawei Optical Transceivers

SFP-25G-SR

Huawei SFP-25G-SR Module adopts hot-swappable SFP28 package, working wavelength is 850nm, it is a full-duplex transceiver module.

Request Pricing for SFP-GE-LX-SM1310

Send quantity and destination and we will confirm price availability lead time and any accessories the installation needs

No forms No sign up Replies within one working day

FAQ

SFP-GE-LX-SM1310 Frequently Asked Questions

Is SFP-GE-LX-SM1310 New or Refurbished

Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.

Can I Get the Serial Number Before Payment Clears

Yes. Serials are issued before shipment so you can validate them against the vendor entitlement portal while the goods are still with us.

What Is the Lead Time for SFP-GE-LX-SM1310

Stock positions ship in two to four working days after cleared payment. Lines placed on order carry a factory lead time that is confirmed in writing at quotation.

Are Accessories Included

Accessories are quoted alongside the unit rather than assumed. Send the site requirement and the quotation will list everything the installation actually needs.

Do You Supply a Support Contract with It

Yes. Vendor support can be quoted with the hardware and registered under the end user name rather than under a reseller name.

What Warranty Does It Carry

Twelve months replacement warranty as standard. Faulty goods are returned under a return authorisation issued by us with the return address and instructions.

Can You Ship SFP-GE-LX-SM1310 to My Country

We ship worldwide by DHL FedEx UPS EMS or freight. You may also nominate your own courier account. Import duties are payable by the consignee.

Can You Drop Ship It to My Customer

Yes. Packing lists and outer labels can be prepared in your name so the consignment reaches the end customer directly.

What If It Arrives Damaged

Photograph the packaging before opening and contact us the same day. Transit insurance is available and recommended on higher value consignments.

Do You Supply Volume Quantities

Yes. Volume is handled against a rolling forecast so allocation is positioned ahead of demand rather than chased after the purchase order.

Chat on WhatsApp