Cisco Modules & Cards
C9200-NM-4X
Cisco Catalyst 9000 Switch Modules. Catalyst 9200 4 x 10GE Network Module, spare
Cisco · Cisco Modules & Cards
QSFP-H40G-CU1M
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU1M
New Factory Sealed12 Months Warranty
Serial List Before ShipmentWorldwide Delivery
- Part Number
- QSFP-H40G-CU1M
- Brand
- Cisco
- Category
- Cisco Modules & Cards
- Lead Time
- Confirmed in writing at quotation
Product Overview
QSFP-H40G-CU1M Overview
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU1M
Key Benefits
What Owning It Changes
- Modules matched to the chassis generation so they are recognised on insertion
- A supply route for line cards the main channel has already moved past
- Power and slot implications confirmed before the order is placed
- Spares held against the same part number so a failure is a swap not a project
Problems It Solves
Pain Points It Removes
- Modules that do not match the chassis generation or software train
- Line cards discontinued while the chassis is still years from replacement
- Power budget exceeded once a new module is added to a populated chassis
- Long lead times on a small part that blocks a large deployment
Who It Is For
Who Benefits Most from QSFP-H40G-CU1M
Network Engineers
Adding interfaces to a chassis already installed and in production
System Integrators
Completing a chassis order with the line cards the design calls for
Data Centre Teams
Expanding port capacity without replacing the chassis
Enterprise IT Teams
Keeping spare modules on the shelf for critical chassis
Specifications
Supply Specification
| Part Number | QSFP-H40G-CU1M |
|---|---|
| Brand | Cisco |
| Category | Cisco Modules & Cards |
| Product Condition | New factory sealed |
| Chassis Compatibility | Chassis model and software train confirmed before shipment |
| Power and Slot | Implications reviewed against the current chassis population |
| Warranty | 12 months replacement |
| Packaging | Original vendor carton with anti static protection |
| Country of Origin | As printed on the vendor label |
Full electrical port and throughput specifications are issued with the quotation against the current vendor datasheet revision
Application Scenarios
Where It Is Deployed
Manufacturing And Quality Control
How This Unit Reaches You
-
01
Chassis Check
Target chassis generation slot map and software train confirmed
-
02
Power Check
Remaining power budget reviewed against the new module draw
-
03
Sourcing
Allocated from stock or ordered with a written lead time
-
04
Inbound Check
Seal photographed serial recorded and validated against the vendor database
-
05
Export Packing
Anti static wrap inside an export grade outer
-
06
Documentation
Serial list invoice packing list and certificate pack issued with tracking
ISO 9001
Quality management system covering sourcing inspection and despatch
ISO 14001
Environmental management across packaging and waste handling
CE
Conformity marking as applicable to the equipment supplied
FCC
Compliance marking as applicable to the equipment supplied
RoHS
Restriction of hazardous substances as declared by the manufacturer
Export Compliance
Screening against destination and end use restrictions before despatch
Comparison
Compared with Other Models in This Category
| QSFP-H40G-CU1M | C9200-NM-4X | QSFP-100G-AOC1M | QSFP-100G-AOC20M |
|---|---|---|---|
| Cisco Modules & Cards | Cisco Modules & Cards | Cisco Modules & Cards | Cisco Modules & Cards |
| New factory sealed | New factory sealed | New factory sealed | New factory sealed |
| 12 months replacement | 12 months replacement | 12 months replacement | 12 months replacement |
| Serial list before shipment | Serial list before shipment | Serial list before shipment | Serial list before shipment |
Detailed port power and throughput comparison is supplied with the quotation because the right choice depends on the uplink and power budget at your site
Use Guide
Deployment Guide for QSFP-H40G-CU1M
-
1
Confirm the Part Number
Check the full part number including any suffix that sets the software tier or power option. A single trailing letter frequently changes what the unit can do.
-
2
Check Site Prerequisites
Confirm rack space power cabling and any uplink or accessory dependency before the order is placed rather than at install.
-
3
Unpack and Record
Photograph the seal before opening and record the serial against your asset register. Keep the carton until commissioning is complete.
-
4
Stage Before Deployment
Apply the base configuration and target software version on the bench so the change window is used for installation rather than setup.
-
5
Register Entitlement
If a support contract was purchased register it under the end user name so cases and downloads flow to the operating party.
-
6
Hold a Matched Spare
For any position where downtime carries real cost keep a spare against the same part number rather than a similar model.
Customisation
Options We Can Configure Before Despatch
Base Configuration Staging
Hostname management address and base config applied so the unit joins on rack
Software Version Alignment
Target software train applied so every unit in a wave matches
Per Site Kit Packing
Packed per site with accessories rather than per part number
Neutral Documentation
Packing lists and labels prepared in your name for direct delivery
Related Products
Other Models in Cisco Modules & Cards
Cisco Modules & Cards
QSFP-100G-AOC1M
The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.
Related Reading
Cases and Guides Connected to This Product
Request Pricing for QSFP-H40G-CU1M
Send quantity and destination and we will confirm price availability lead time and any accessories the installation needs
No forms No sign up Replies within one working day
FAQ
QSFP-H40G-CU1M Frequently Asked Questions
Is QSFP-H40G-CU1M New or Refurbished
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Can I Get the Serial Number Before Payment Clears
Yes. Serials are issued before shipment so you can validate them against the vendor entitlement portal while the goods are still with us.
What Is the Lead Time for QSFP-H40G-CU1M
Stock positions ship in two to four working days after cleared payment. Lines placed on order carry a factory lead time that is confirmed in writing at quotation.
Are Accessories Included
Accessories are quoted alongside the unit rather than assumed. Send the site requirement and the quotation will list everything the installation actually needs.
Do You Supply a Support Contract with It
Yes. Vendor support can be quoted with the hardware and registered under the end user name rather than under a reseller name.
What Warranty Does It Carry
Twelve months replacement warranty as standard. Faulty goods are returned under a return authorisation issued by us with the return address and instructions.
Can You Ship QSFP-H40G-CU1M to My Country
We ship worldwide by DHL FedEx UPS EMS or freight. You may also nominate your own courier account. Import duties are payable by the consignee.
Can You Drop Ship It to My Customer
Yes. Packing lists and outer labels can be prepared in your name so the consignment reaches the end customer directly.
What If It Arrives Damaged
Photograph the packaging before opening and contact us the same day. Transit insurance is available and recommended on higher value consignments.
Do You Supply Volume Quantities
Yes. Volume is handled against a rolling forecast so allocation is positioned ahead of demand rather than chased after the purchase order.